What scale am I actually printing?
Necromunda uses the same 32mm heroic scale as Warhammer 40,000. Gangers, hangers-on, and hired guns are all 32mm. The game features distinctive gang aesthetics — Goliaths are massive hulking brutes, Eschers are lean and fast, Van Saars are tech-heavy. Terrain (platforms, walkways, industrial machinery) is as important as the minis themselves.
I scale every gang model to 32mm and separately treat the terrain as a bulk job. Necromunda terrain is dense, modular, and full of walkways and gantries, which FDM prints in volume far cheaper than buying kits. Layer lines blend into the industrial, worn aesthetic of the hive.
Gangs are small enough to give each model a fine profile, and the flavor of the game rewards details like masks, cables, and scavenged gear surviving the print. I keep the gang and the terrain on different profiles so I am not slow-printing an entire hive at character settings.
Deep Dive: 32mm gangers in the underhive
Necromunda is 32mm like 40k, but the game lives in gang identity — faces, gear, and the vertical industrial board. Printing proxies is about character detail and terrain volume.
The 32mm Gang Standard
Necromunda uses the same 32mm heroic scale as Warhammer 40,000. Gangers, hangers-on, and hired guns all sit at 32mm. The size differences you see between gangs — Goliaths are massive brutes, Eschers are lean, Van Saars are tech-heavy — are design choices, not scale drift. All of them share the same eye-level reference.
Converting Classic 28mm Gangers
| Conversion | Formula | Slicer % |
|---|---|---|
| Classic (28mm) → Necromunda (32mm) | 32 ÷ 28 | 114.3% |
| Necromunda (32mm) → Classic (28mm) | 28 ÷ 32 | 87.5% |
Faces and Individual Characters
Every ganger is a character — Necromunda campaigns build stories around individual models. I print gangers at 0.2mm nozzle and 0.06mm layers so the faces read. The models have distinctive silhouettes and a lot of small gear detail that FDM softens.
Vertical Terrain
Necromunda is a vertical game. Sector Mechanicus platforms, pipe networks, and walkways dominate the board — and you need a lot of it. This is where FDM shines: 0.4mm nozzle at 0.1mm layers and you can build out a multi-level board in reasonable time. FDM for the board, FDM for the gangers at 0.06mm — that's the split I use.
Common Necromunda Mistakes
- Printing different gangs at different scales. The whole game lives in the underhive together — keep every gang at 32mm.
- FDM for the gangers. The gear and faces are the selling point — give them the 0.2mm nozzle.
- Underestimating terrain volume. The board is half the game and eats plastic by the plateful. Budget for it.
Scale Conversions for Necromunda
Slicer percentages for converting between Necromunda and other common miniature scales.
| Conversion | Description | Slicer % |
|---|---|---|
| 28mm → 32mm | Classic to Necromunda Scale | 114.3% |
| 32mm → 28mm | Necromunda to Classic Scale | 87.5% |
| 32mm → 35mm | Necromunda to Legion/MCP | 109.4% |
| 32mm → 75mm | Tabletop to Display | 234.4% |
Printing these minis on FDM
Print gang models at a 0.2mm nozzle and 0.06mm layers to keep the scavenged detail crisp. Bulk hive terrain prints fast at a 0.4mm nozzle where layer lines fit the industrial look.
All settings tested on my Bambu Lab A1 Mini with PLA. Your printer may want something different — always print a test piece first.
Other Games at 32mm Scale
These systems use the same miniature scale as Necromunda. In most cases, miniatures are interchangeable between them — though art style and proportions will still vary by manufacturer.
Frequently Asked Questions
What scale is Necromunda?
Is Necromunda good for 3D printing?
Necromunda and all related names, ranges, and units are trademarks of Games Workshop. STLACCESS is an independent hobby project — not affiliated with, endorsed by, or sponsored by any game manufacturer or publisher. Names appear only to identify miniature scales and printing settings; no branded files, models, or artwork are hosted here.Full trademark notice
Time to check the scale before you commit to a long print.
Launch the STL scale calculator