3D Print Scale Guides

Every guide here is written by me and answers one practical question. I group them into the same four tracks used across the site so you can follow a path instead of jumping between unrelated posts. Everything is based on prints and measurements from my own build plate.

Looking for the short version? Start with the learning hub or the methodology page.

Skip to content

Choose a learning track

All guides by learning track

Scale & mathscale theory

Real-World Objects to 28mm Scale: Feet to MM Conversion for 28mm WWII Platoon Wargames, the Classic Fantasy RPG & Historical

The formula I use to convert real-world heights to true 28mm miniature scale. Charts for humans, monsters, vehicles, and terrain for 28mm WWII platoon wargames, the classic fantasy RPG, and historical wargaming.

Read guide
Scale & mathscale conversion

How to Scale 28mm to 32mm (114.3% Slicer Percentage, Explained)

What percent for 28mm to 32mm? 114.3% with XYZ locked. The math behind the conversion, the exact slicer steps for Chitubox, Lychee, Cura, and PrusaSlicer, and how to verify it on a test print.

Read guide
Scale & mathscale conversion

How to Downscale 32mm to 28mm (87.5% Slicer Percentage, Explained)

Shrink 32mm miniatures down to true 28mm scale with an 87.5% slicer percentage. Fits more minis on a resin plate and mixes D&D proxies into true-scale armies.

Read guide
Scale & mathscale theory

How to Measure a Miniature's Scale: Eye Level vs Top of Head Explained

How I measure miniature scale for 3D printing — eye level vs top of head, PARKSIDE digital calipers, and why the 175cm baseline works.

Read guide
Scale & mathscale theory

Real-World Objects to 32mm Scale: Feet to MM Conversion (The Math Explained)

The formula I use to convert real-world heights to 32mm miniature scale. Charts for humans, horses, monsters, and terrain for Warhammer, D&D, and Bolt Action.

Read guide
Scale & mathscale theory

Why Miniature Scales Use a 175cm Human Baseline

Most tabletop miniature scales are built around a 175cm (5'9) human. Here is why I chose that number for every STLACCESS scale conversion.

Read guide
FDM printingfilament

Filament Density: Convert Print Volume to Grams and Cost

Use material density to turn a model's cm³ into grams, grams into cost, and hollow prints into a realistic filament estimate.

Read guide
FDM printingArachne

Arachne vs Classic Wall Generator: Which Is Sharper for Miniatures?

Arachne is supposed to make tighter details than the classic wall generator, but on test miniatures classic often prints fine detail sharper. A practical comparison for 28-32mm FDM prints.

Read guide
FDM printingCura

Cura Tree Support Settings: How to Make Supports Easy to Remove

The exact Cura tree (organic) support settings for 3D printing miniatures that come off clean — Z distance, interface layers, branch distance and angle, and painting supports on manually.

Read guide
FDM printingFDM vs resin

FDM vs Resin 3D Printing for Miniatures: When to Switch

The honest resin vs FDM comparison for tabletop miniatures — detail, support removal, toxicity, speed, and which kinds of models each printer genuinely does better.

Read guide
FDM printingFDM printing

Best Budget 3D Printers for Tabletop Wargaming — FDM Terrrain & Vehicle Guide

Top budget FDM 3D printers for wargaming terrain, vehicles, and scatter. Sovol SV06 ACE, Creality Ender-3 V3 SE, Bambu Lab A1 Mini, and Elegoo Centauri Carbon compared.

Read guide
FDM printingFDM printing

FDM Miniature Printing: Complete Guide to Layer Height, Nozzles, and Settings

Best FDM settings for tabletop miniatures — nozzles, layer heights, orientation tips, and post-processing for 28mm and 32mm models. Tested on my Bambu Lab A1 Mini.

Read guide
FDM printingupscaling

Upscaling 3D Prints: How Big Can You Enlarge a 32mm Miniature Before Losing Detail?

How much can you enlarge a 32mm miniature on FDM before losing detail? Layer line visibility, nozzle settings, and slicer tips for clean upscaling on my Bambu Lab A1 Mini.

Read guide